Page 28 - JK Profile
P. 28

Application:                                                                                                                                                                                                               New Version of
               • Prior to starting application, properly wet the substrate with clean water and ensure if it is damp while application.
               • Gradually apply WP66 from bottom to top direction by pressing firmly over the substrate using steel trowel or suitable Putty
                  blades and properly level it to a smooth layer.
               • Ensure that the maximum thickness per coat is not to exceed 1.5 mm.
               • If a second coat is needed, please ensure that the first coat is cured well and that the maximum thickness should not exceed 3 mm in total.
               • Mix only the needed quantities that are going to be applied to avoid any drying of the mixed material by time.

      Curing:     It generally doesn’t need any curing. However, during extreme weather conditions, it needs to be cured with clean water for
                minimum 2 days at frequent intervals.                                                                                                  WP88
                                                                                                                                                                    - FINISH COAT

      Recommendations:                                                                                                        Product Description:  JK CEMENT WallMaxX WP88 is a White Cement based one component Finish Coat. This factory
                                                                                                                              controlled product has a unique blend of composition, thereby properly filling pores, blowholes, minor honeycombs on the
               • Ensure to not use it on metal or any non-absorbing surfaces                                                  concrete and plastered surfaces. Also, it is a perfect skim coat to give smooth finish with an excellent aesthetic appeal which is
               • Refrain from application during rain, unstable weather conditions or under direct sun light.                 vital for subsequent painting stages. It is suited both for interior and exterior areas.
               • Once applied, any excess material needs to be removed with wet cloth before it dries and all application tools should be immediately  Key Features:
                  cleaned with water
                                                                                                                                       Robust Bonding Strength and higher durability
               • To achieve surface even and remove application mark before applying paint use waterproof emery paper for sanding purpose.   Very Smooth and White Color Finish

                                                                                                                                       Excellent Water Resistance
      Storage:                                                                                                                        Application Areas:

               • Shelf Life: 12 Months from date of manufacture if covered well and                                                    Concrete, Pre-cast and Plastered Concrete substrates
                  stored in pallets, away from heat, Sun light and moisture.                                                           Plastered Solid/Hollow Concrete Blocks
               • Care should be taken that hard & lumpy materials are not to be used.                                                  Plastered Light Weight/AAC Blocks
                                                                                                                                       Areas like Kitchens, Bath rooms, etc. which are
                                                                                                                                         prone to be in water contact.
      Health & Safety:                                                                                                                                                              Technical Characteristics:
                                                                                                                                                                                    Properties             Results
               WP66 contains cement which becomes strongly alkaline upon mixing                                                                                                     Appearance             White Color Powder
               with water and this may cause skin irritation when exposed for very long                                                                                             Composition            White Cement, Fine Graded Fillers, Re-dispersible

               time. Avoid contact with eyes and inhalation of dust. In case of skin/eyes                                                                                             Aggregate Size        Polymer powder and performance enhancing Additives
                                                                                                                                                                                                           < 0.150 mm
               contact, wash with plenty of clean water and seek medical attention                                                                                                  Compressive Strength* as per    > 10.0 N/mm²
               immediately. It is highly recommended to use all relevant Personal                                                                                                   EN:1015-11 (28 days)
               Protective Equipment while handling it and work in well ventilated                                                                                                   Flexural Strength* as per   > 2.5 N/mm²
               conditions while applying it. Keep out from the reach of children.                                                                     Available in 25kg             EN:1015-11 (28 days)   > 1.0 N/mm²
                                                                                                                                                                                    Adhesive Strength* as per
               * Please refer to the Material Safety Data Sheet for more details.                                                                                                   EN:1015-12 (28 days)
                                                                                                                                                     Applicable Standards :         Water Retention* as per    ≥ 95 %
                                                                                                                                                                                    ASTM C1506 - 17
                                                                                                                                                     EN:1015 – 11 | EN:1015 – 12 |    Setting Time* at 25ºC     5-7 Hours
                                                                                                                                                                                    Density (Kg/Liter)       1.50 ± 0.20
                                                                                                                                                     ASTM C1506 - 17                Mixing Ratio           7.5 – 8.5 Liters/25 Kg Bag
                                                                                                                                                                                    Pack Size              25 Kg Paper Bags
                                                                                                                                                                                    Application Thickness     < 3 mm in multiple layers wherein individual layer
                                                                                                                                                                                                           thickness not to exceed 1.5 mm.
               Manufactured & Packed in UAE by                                                                                                                                      Consumption            Approx. 1.25 – 1.5 Kg/m²/1 mm Thickness
                                                                                                                                                                                                           (Consumption data may vary depending on nature of
                                                                                                                                                                                                           substrate, application method, transfer efficiency, etc.)
                                                                                                                                                                                    * Based on laboratory values tested at Standard Conditions of Temperature and %Relative Humidity
                                                                                                                              Application Guidelines:
               P.O. Box: 123630, The Citadel Tower, Office 2007-08, Business Bay, Dubai, UAE.
               Tel :  +971 4 279 7306 | Fax :  +971 4 420 3906 | Email :                              Surface Preparation:
                                                                                                          • All Surfaces should be thoroughly cleaned to remove dirt, oily stains, grease, loose particles, wood pieces, molds, etc.
                                                                                                                                       • For previously painted/old painted substrates, scrub the layers with proper emery paper/wire brush so that it is free from these
                                                                                                                                          old paint/dust particles.
                                                                                                    Date of Issue - May 2020
      Disclaimer:                                                                                                             Mixing:
      The information given here is based on the best of our knowledge, good faith, experience and laboratory based results. The actual result depends on many factors, like nature of substrate, workmanship/quality of   • It should be mixed with clean water only.
      the application job at site, quality and type of suitable application tool used, quantity of water added, etc. Hence JK Cement Works (Fujairah) is not responsible for any sort of claims/disputes arising out of any   • Mixing should be done in a clean plastic or non-corrosive metal bucket.
      negative results by using our Products. Also, the water for dilution given here is only based on lab results and might vary due to different conditions prevailing at the application site. JK Cement Works Fujairah is   • It is recommended to mix using a low speed electric mixer fitted with proper paddle to achieve a good and homogeneous mix.
      not held responsible for use of this product for applications other than specified and/or adopting any faulty application/curing methodologies. It is the user’s responsibility to have through this Technical Data Sheet  • Mixing ratio is around 7.5 – 8.5 Liters of water per 25 Kg bag which can be adjusted as per site application conditions.
      prior to applying our products and to ensure with JK Cement Works Fujairah that any product information is still prevailing at the time of application. Also the user must be sure that the product is suitable for the   • Once mixed, allow the mix to rest for about 5 minutes and mix it again without adding any extra water prior to application.
      use intended and also applied it as specified while taking care of all precautionary measures. While all the products comply with the properties shown on current technical data sheets/brochures, JK Cement Works   • Also hard and set paste should not be remixed or reused.
      Fujairah does not warrant or guarantee the products’ performance as it doesn’t have any control over factors adopted during its actual application.
   23   24   25   26   27   28   29   30   31   32   33