Page 30 - JK Profile
P. 30

Application:
               • Prior to starting application, properly wet the substrate with clean water and ensure if it is damp while application.
               • Gradually apply WP88 from bottom to top direction by pressing firmly over the substrate using steel trowel or suitable Putty
                  blades and properly level it to a smooth layer.
               • Ensure that the maximum thickness per coat is not to exceed 1.5 mm.
               • If a second coat is needed, please ensure that the first coat is cured well and that the maximum thickness should not exceed 3 mm in total.
               • If texture finish is needed, use damp sponges, plastic floats or other suitable tools. But care should be taken not to overwork the surface.
               • Mix only the needed quantities that are going to be applied to avoid any drying of the mixed material by time.


       Curing:     • After drying, the coated substrate should be cured with clean water for a minimum of 3 days with a frequency of 3 – 4 times a day.


       Recommendations:

               • Ensure to not use it on metal or any non-absorbing surfaces
               • Refrain from application during rain, unstable weather conditions or under direct sun light.
               • Once applied, any excess material needs to be removed with wet cloth before it dries and all application tools should be immediately
                  cleaned with water
               • To achieve surface even and remove application mark before applying paint use waterproof emery paper for sanding purpose.



       Storage:

               • Shelf Life: 12 Months from date of manufacture if covered well and
                  stored in pallets, away from heat, Sun light and moisture.
               • Care should be taken that hard & lumpy materials are not to be used.


       Health & Safety:

               WP88 contains cement which becomes strongly alkaline upon mixing
               with water and this may cause skin irritation when exposed for very long
               time. Avoid contact with eyes and inhalation of dust. In case of skin/eyes
               contact, wash with plenty of clean water and seek medical attention
               immediately. It is highly recommended to use all relevant Personal
               Protective Equipment while handling it and work in well ventilated
               conditions while applying it. Keep out from the reach of children.
               * Please refer to the Material Safety Data Sheet for more details.









               Manufactured & Packed in UAE by





               P.O. Box: 123630, The Citadel Tower, Office 2007-08, Business Bay, Dubai, UAE.
               Tel :  +971 4 279 7306 | Fax :  +971 4 420 3906 | Email : sales.fuja@jkcement.com
               www.jkcementuae.com

                                                                                                    Date of Issue - May 2020
       Disclaimer:
       The information given here is based on the best of our knowledge, good faith, experience and laboratory based results. The actual result depends on many factors, like nature of substrate, workmanship/quality of
       the application job at site, quality and type of suitable application tool used, quantity of water added, etc. Hence JK Cement Works (Fujairah) is not responsible for any sort of claims/disputes arising out of any
       negative results by using our Products. Also, the water for dilution given here is only based on lab results and might vary due to different conditions prevailing at the application site. JK Cement Works Fujairah is
       not held responsible for use of this product for applications other than specified and/or adopting any faulty application/curing methodologies. It is the user’s responsibility to have through this Technical Data Sheet
       prior to applying our products and to ensure with JK Cement Works Fujairah that any product information is still prevailing at the time of application. Also the user must be sure that the product is suitable for the
       use intended and also applied it as specified while taking care of all precautionary measures. While all the products comply with the properties shown on current technical data sheets/brochures, JK Cement Works
       Fujairah does not warrant or guarantee the products’ performance as it doesn’t have any control over factors adopted during its actual application.
   25   26   27   28   29   30   31   32   33   34   35